They are from a 89-91 Mazda Rx-7 / Part number - Denso 195500-2010. Let me know if you can actually get a hold of some.. UPnP list's an rx-7 but I can bet the injectors are gone like usual.
Announcement
Collapse
No announcement yet.
Two go in and one comes out (Operation body swap)
Collapse
This is a sticky topic.
X
X
-
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
-
Non turbo, red tops, same round plugs as the BP injectors. The part number is on the sides of the tops.
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
Rusty has a set ill call him"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
I thought it was cramped in the engine bay before.. Here's a dirty photo of the naughty one.
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
mmmmm booost-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE! pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606
Comment
-
I'm about to take it out for a lil trip and see how it goes. Probably work on hanging the rest of the exhaust tomorrow if I get the time to do so.
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
Well.... I couldn't help myself and decided to crack ewg on the way to the parts store to grab some vac hose 1 bar on this turbo np as long as I was on it through the gears, although I did get some cut when I did a pull in 4th from 40mph. I'll have to fine tune the ebc now since it's still set for the old setup.. gotta love the smoothness of external gates.
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
Originally I said I'd probably be slightly disappointed with the t3 vs vj20, but I honestly don't miss the vj20 at all now. So far imho this setup is far more responsive. Those of you hanging on to the vj20's, do yourself a favor and get rid of it for an upgrade
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
Originally posted by jinx View PostWell.... I couldn't help myself and decided to crack ewg on the way to the parts store to grab some vac hose 1 bar on this turbo np as long as I was on it through the gears, although I did get some cut when I did a pull in 4th from 40mph. I'll have to fine tune the ebc now since it's still set for the old setup.. gotta love the smoothness of external gates.Cincinnati, ohio Bengals for life
"Who Dey"
Comment
-
Originally posted by bomdoutscort View PostSo you did 14 psi on the gtx injectors? Also when it cut was it a load that made it cut or did you boost more than 1 bar that made it cut?
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
knew youd like it....... do explain tho why you say its far more responsive---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Originally posted by bpt323 View Postknew youd like it....... do explain tho why you say its far more responsive
HPLogic Mustang Dyno @ 15psi on MS1 v3 226 whp / 195 ft-lb [HD Video]
Soon to be powered by a Precision snail on crack...
Add me on more pictures of my projects can be found there.
Comment
-
awesome man!!! glad you're happy with the setup! i bet the ewg dump sounds crazy nasty at WOT haha, i'd love to hear it!-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE! pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606
Comment
Comment