I have desk top dyno pro and i'm trying to run the stock specs and then look into what my modifications will do when i put the engine in the car... i have some of the specs but not all
Short Block:
Bore: 3.030 in
Stroke: 3.350 in
Cylinder Heads:
Cylinder Heads: 4-valve Head/Stock Ports and Valves
Airflow File:***
Intake Valve: 1.102 in
Exhaust Valve: 1.102 in
Compression
Comression Ratio: 8.5:1
Induction:
Induction Flow: 300.0 cfm @ 1.50 inHg
Manifold type: Tuned-Port injection
Exhaust:
Eshaust system: Small-Tube Headers with Mufflers
Camshaft:
Camshaft Type: Stock Street/Economy
Lifter: Hyd. Lobe Center: 116.5
Cam Specs@: 0.050-Lift Valve overlap: 22.0
Int Lift@Valve: 0.319 in Int Duration: 254.0
Exh Lift@Valve: 0.338 in Exh Duration: 256.0
Nominal Timing Timing@ Adv(+)/Ref(-): 0.0
IVO (BTDC): 12.0 IVC (ABDC): 62.0
EVO (BBDC): 66.0 EVC (ATDC: 10.0
there are a few other specs listed in the program but they don't appear to be changeable... so any help with this would be great and i htink i could probably email the program to a few people if interested
Short Block:
Bore: 3.030 in
Stroke: 3.350 in
Cylinder Heads:
Cylinder Heads: 4-valve Head/Stock Ports and Valves
Airflow File:***
Intake Valve: 1.102 in
Exhaust Valve: 1.102 in
Compression
Comression Ratio: 8.5:1
Induction:
Induction Flow: 300.0 cfm @ 1.50 inHg
Manifold type: Tuned-Port injection
Exhaust:
Eshaust system: Small-Tube Headers with Mufflers
Camshaft:
Camshaft Type: Stock Street/Economy
Lifter: Hyd. Lobe Center: 116.5
Cam Specs@: 0.050-Lift Valve overlap: 22.0
Int Lift@Valve: 0.319 in Int Duration: 254.0
Exh Lift@Valve: 0.338 in Exh Duration: 256.0
Nominal Timing Timing@ Adv(+)/Ref(-): 0.0
IVO (BTDC): 12.0 IVC (ABDC): 62.0
EVO (BBDC): 66.0 EVC (ATDC: 10.0
there are a few other specs listed in the program but they don't appear to be changeable... so any help with this would be great and i htink i could probably email the program to a few people if interested
Comment