i heard that there was a way to get more power by taking a exhaust camshaft off a bp05 head and puttin it for your intake camshaft. is this true? what type of modification is required for this if there's any. what other procedures would i have to do to make this worki, if it can be done.
Announcement
Collapse
No announcement yet.
exintake question
Collapse
X
-
this time i'll have to say use the advanced search. There have been a few in depth threads about this that should tell you everything you need to know.
But yes, you heard correct. you'll need an adjustable cam gear.---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
-
please research that. If you truely seek to do this mod (worth it & then some)
you'll need to search for the installation information anyhow.---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
so basically all i have to do is get a ex. camshaft out of a bp05 head, cut the distributor end off and clean the edges, place it for an intake camshaft, set it to a 18 degree advance and it'll show a good increase. now they said that youll need an adjustable cam gear, b ut you can also do it with factory gears as well but it would be off by a few hp. all i have to do is set the gear at a 180 degree and go counter clockwise 3 teeth and ill be set huh, sounds confusing but ill give it a try, any one has any last minute easier, non-confusing helpful advice, im all open ears, but thatnx everyone for the helpful info.Diamond Image's 91 Protege LX
"The Sleeper"
Comment
-
5 degrees is pushing close to another full tooth.... so having the adjustable cam gear is highly reccomended. i would not attempt this swap without one.
only with the turbo version can you narrowly sneak by losing a few HP without an adjustable cam gear.---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
Comment