walbro fuel pump

[Turpro]

ok i searched already. I just got done reading ryans how-to on installing the rx7 pump. here's the deal. I heard that there is a direct drop in pump. does anybody know the part number?

[deadly_sleeper]

you just had to go and be impatient. i told you i would look for it and let you know.

these are the numbers i found when looking for a pump. this is off of idenity_x's thread, and he said that it was just a straight bolt in.

GSS315 with 400-866 kit.

if anybody else knows of a kit that goes directly in, please chime in.

[FazdaBoy4ever]

http://www.autoperformanceengineering.com/html/fpapps.html

thats where i got mine with all the gaskets, the sock, the pump and a new clip for the pump, mine was for the escort, im not sure what is different between the protege and the escort, i always though they were the same (other than the sending unit itself.

[Turpro]

you just had to go and be impatient. i told you i would look for it and let you know.

these are the numbers i found when looking for a pump. this is off of idenity_x's thread, and he said that it was just a straight bolt in.

GSS315 with 400-866 kit.

if anybody else knows of a kit that goes directly in, please chime in.

do you have a link to his thread so that others can see. this would help more members unless ppl want too wait a few months till i get mine in to see the results.

[Turpro]

ok. from my google search that walbro pump number is showing on a couple sites that it for a 88-92 ford probe gt,mazda mx6 turbo.

http://www.amazon.com/Walbro-GSS315-400-866-Install-Fuel-Pumps/dp/B000EDEQC6/sr=1-81/qid=1165722231/ref=sr_1_81/102-2364323-2000957?ie=UTF8&s=automotive

http://www.powertechperformance.com/fuelpumps/fuelpumps_ford.html

but this thread is saying rx7.

http://www.wihandyman.com/forum/showthread.php?t=6718

which one is it? does anybody have walbros phone number or a way of contacting them? i'll make the call too find out

[MD323]

pastor pro's pump was bolt on we had to finess (sp?) the pump into place alittle but there was no cutting or anything to the like. I got the p/n somewhere...

[Turpro]

pastor pro's pump was bolt on we had to finess (sp?) the pump into place alittle but there was no cutting or anything to the like. I got the p/n somewhere...

what kind of finessing are we talking about? and what pump did he use?

[MD323]

what kind of finessing are we talking about? and what pump did he use?

just had to work the pump back into the cradle, there was maybe 1/8 of an inch difference in angle between the pump and the cradle. the pump was an rx-7 walboro (sp?) pump, ill find the part number for ya tomarrow, im too tired from pulling my transmition to think about where i put it