Announcement

Collapse
No announcement yet.

Wire tuck question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Wire tuck question

    Ok! I've got the left fender harness de-loomed and the fuse box wiring isolated and now inside the cars cabin completely, and the rest of the harness for the headlights, corners, ect...were left up front.

    I've only had to cut 2 wires so far, yellow and black to separate the fuse harness from the complete harness. So it's been pretty easy in that department.

    What do i have to pull into the car on the right fender harness? It's been a long time since I've messed with a BG and I don't remember what plug is for what...I know the obvious ones like headlight and corner marker.

    I've also got the fuse box in the glove box, and i'm going to open up a hole in the firewall to pull the charging harness through.

    I'm going to go snap pics right now to show you.

    EDIT: left the camera on from when i was uploading pics and drained the battery lol so it'll be a little bit
    Last edited by Mazda_Powered; 03-23-2010, 05:59 PM.
    -Jack

    ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

    91 626 LX - basically stock and pretty slow still
    http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

    01 E53 3.0i - FOR SALE! pm if interested

    91 USDM Protege LX - SOLD! turbo/manifold up for sale!
    http://www.clubprotege.com/forum/showthread.php?t=46606

    #2
    I'd tell you but I have never owned a BG, one mx-3 but I think that's an EC maybe?
    2011 BMW 128i 6 Speed Manual -- dd
    1990 Protege 4WD 5 Speed

    Comment


      #3
      ya i deffinatly wanna see pics, ive been trying to clean mine up a bit.... do a walk threw...
      92 protege lx-

      94 protege lx-

      95 escort gt-ms2e/ms2extra pre3.3alpha5 gslender v2.8-e85-vj23@12lbs----dead--

      are you a thinker, or a believer?

      Comment


        #4
        ok here's the leftovers that go to the front of the car



        here's where the harness comes into the car



        here's how much wire i managed to get lol it JUST reaches to the glove box too...just...



        Here's the right fender harness plugs



        I also accidentally pulled this plug in, i'm not sure what it's for...can anyone help ID it? 4 wires.


        -Jack

        ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

        91 626 LX - basically stock and pretty slow still
        http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

        01 E53 3.0i - FOR SALE! pm if interested

        91 USDM Protege LX - SOLD! turbo/manifold up for sale!
        http://www.clubprotege.com/forum/showthread.php?t=46606

        Comment


          #5
          Sure i'll do a write up on it if you want...but i didnt snap any pics of the fender harnesses before i de loomed and organized them...thats the major step lol

          EDIT: here's the 2 wires i cut so i could pull the complete fuse harness into the car

          -Jack

          ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

          91 626 LX - basically stock and pretty slow still
          http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

          01 E53 3.0i - FOR SALE! pm if interested

          91 USDM Protege LX - SOLD! turbo/manifold up for sale!
          http://www.clubprotege.com/forum/showthread.php?t=46606

          Comment


            #6
            the one you pulled out looks similar to the cruise control plug
            1994 Escort LX Wagon
            2013 Hyundai Veloster Turbo
            91 Infiniti M30 Convertible - Traded in for Veloster
            91 EGT - Junked May 2012

            "Going to church doesn't make you a Christian like standing in a garage doesn't make you a car."

            "I usually downshift when I'm near a Prius so they can hear me hurting the environment"

            Comment


              #7
              yeah def. do a write up. when I pull the motor in the escort I wanna clean the bay up and paint it

              1994 Escort GT Turbo

              Comment


                #8
                can anyone else verify the plug is for cruise control? 3 mixed blues and a black wire.

                can anyone ID the plugs on the right fender too? I know there's:

                headlight
                corner
                ground
                -Jack

                ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

                91 626 LX - basically stock and pretty slow still
                http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

                01 E53 3.0i - FOR SALE! pm if interested

                91 USDM Protege LX - SOLD! turbo/manifold up for sale!
                http://www.clubprotege.com/forum/showthread.php?t=46606

                Comment


                  #9
                  windshield washer its on the passenger side. black 2 wire connector
                  2012 Kia rio
                  2009 Nissan Frontier
                  1997 chaparral 180LE

                  Comment


                    #10
                    sweet thanks man, i'll have to deloom that since my washer stuff will be against the firewall soon enough lol.

                    going to the wreckers to take pics so i can finish this thing up.
                    -Jack

                    ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

                    91 626 LX - basically stock and pretty slow still
                    http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

                    01 E53 3.0i - FOR SALE! pm if interested

                    91 USDM Protege LX - SOLD! turbo/manifold up for sale!
                    http://www.clubprotege.com/forum/showthread.php?t=46606

                    Comment


                      #11
                      ooook so today i noticed a few mistakes i made and corrected them, nothing major tho, just annoying.

                      I had to extend a few extra wire to get things to the proper length, it was just the 1 plug for the fuse box that has 6 wires to it....

                      no pictures today, i just soldered, and wrapped some harnesses...maybe on friday.
                      -Jack

                      ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

                      91 626 LX - basically stock and pretty slow still
                      http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

                      01 E53 3.0i - FOR SALE! pm if interested

                      91 USDM Protege LX - SOLD! turbo/manifold up for sale!
                      http://www.clubprotege.com/forum/showthread.php?t=46606

                      Comment


                        #12
                        so how many wires did you need to cut in order to move the fuse box inside?
                        1994 Escort LX Wagon
                        2013 Hyundai Veloster Turbo
                        91 Infiniti M30 Convertible - Traded in for Veloster
                        91 EGT - Junked May 2012

                        "Going to church doesn't make you a Christian like standing in a garage doesn't make you a car."

                        "I usually downshift when I'm near a Prius so they can hear me hurting the environment"

                        Comment


                          #13
                          to move it inside? only 3, a thicker yellow wire, a black one, then a smaller black/green.

                          I believe the yellow and black wire are just for the cooling fan too.

                          To get the harness all the same length i had to extend the plug that the yellow and black go to.

                          It just takes a while to strip the harness and pull it inside. Then to pull apart the dash to hide the wiring...ect
                          -Jack

                          ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

                          91 626 LX - basically stock and pretty slow still
                          http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

                          01 E53 3.0i - FOR SALE! pm if interested

                          91 USDM Protege LX - SOLD! turbo/manifold up for sale!
                          http://www.clubprotege.com/forum/showthread.php?t=46606

                          Comment


                            #14
                            yea, i know the thing about pulling the dash apart. it sucks. ill probably rip it all apart again over summer to remove some more wiring
                            1994 Escort LX Wagon
                            2013 Hyundai Veloster Turbo
                            91 Infiniti M30 Convertible - Traded in for Veloster
                            91 EGT - Junked May 2012

                            "Going to church doesn't make you a Christian like standing in a garage doesn't make you a car."

                            "I usually downshift when I'm near a Prius so they can hear me hurting the environment"

                            Comment


                              #15
                              its not that bad of a process with the dash, just with the wiring and untangling it and feeding it thru weird places lol.
                              -Jack

                              ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/

                              91 626 LX - basically stock and pretty slow still
                              http://www.clubprotege.com/forum/sho...my-GD-626-LX-)

                              01 E53 3.0i - FOR SALE! pm if interested

                              91 USDM Protege LX - SOLD! turbo/manifold up for sale!
                              http://www.clubprotege.com/forum/showthread.php?t=46606

                              Comment

                              Working...
                              X