No start BP swap (URGENT!!)

[e2blade]

I just swapped a BP into my protege dx
it will not crank at all, the solenoid on the starter isnt even kicking out. im using a LX wire harness BUT im using a B8 ECU,

my question is, will it even crank on a B8 ECU let alone just run?

i gotta move in 2 days and gotta get this car running!, i think someone has a BP ecu in the state, but i just wanna crank this thing over.

[bomdoutscort]

It should crank with a b8 ecu. Lift the car, try hitting on the starter or put it in neutral jump the power wire on the starter to the solenoid wire.

[SgtRauksauff]

The ECU has nothing to do with the starting circuit.

Do you have the starter wires hooked up right? Do you have the ground connected right?

Is the interlock/interrupt switch (park/neutral/clutch) connected right?

--sarge

[e2blade]

i got it,it was like 1 in the morning last night and i didnt have my head straight, my r tard friend hooked up the oil pressure wire to the starter, durrrr, i reconnect the wires and it started right up!


sorry for a waste of a thread haha