GTX injector rebuild?

[dailordasailor]

I pulled the injectors out of my BP last weekend and one had a pintle cap basically in half. So I am trying to find a new pintle cap. Josh said it should be just one for a 91 RX7. Besides a full gasket/pintle replacement for all 4 on ebay, im having no luck with this search... Any one have a suggestion where I can find one pintle cap? Autozone and Napa both say no.

Side note, any reason I cant mix royal purple synchromesh with another brand for my trans? Had three quarts so need to pic up another.

Thanks
Dale

[bomdoutscort]

Just pull a pintle cap off of any bp injector

[dailordasailor]

that will slide onto a gtx injector?

[Turpro]

Yup

[Mazda_Powered]

yep they're all interchangeable so you're good to go man.

best bet to remove the pintle cap without damaging it is wrap the pintle cap with a rag then twist and pull it off. Then it just slips on and snaps down onto the GTX injector.

If any other seal is hard I would recommend replacing them though. ie. o rings, insulators. They can be purchased on rockauto for cheap or ebay as well.