removing door panels

[92mp]

Ok i have a 92 DX and i am not sure how to get the door panels off. Well i have unscrewed everything and popped out all the plastic rivets, but i have a manual window. I have no clue how to get the handle for rolling the window down off. I searched the forums, but came up with nothing.

-Curtis

[JGSlayer]

push the door panel in a little and look down near the handle you'll see a stell retaining ring push it out with a screw driver that should do it.

[92mp]

There is a plastic washer behind the handle, which doesn't allow me to see much into the door. All i can see is a brass colored ring, is this the right thing to pop off?

Thanks-Curtis

[JGSlayer]

yeah i think so, you should be able to slide it off from one side but make sure you dont bend it to remove it just slide it off.

[Jojo81]

it´s brass coloured and omega-shaped, that´s it

[92mp]

Yeah i got it off, thanks you guys.

-Curtis

[BP18Protege]

The easiest way is to take a old rag and move it back and forth under the handle and the little clip pops out.

[JGSlayer]

make sure when you put the door back on you pop the clip back on the handle first then put it back that is the easiest way.

[Banzai94Pro]

The easiest way to do it is to get a window tool like me, that gets pushed in and is U-shaped pops right out.