I didn't do any measurements on the pads, but I'd say they have about 20% more surface area. The EGT piston, being 31mm is 6.8% larger than the mx3/gtx's 30mm piston.
Announcement
Collapse
No announcement yet.
What did you do to your BG(part 8)
Collapse
This is a sticky topic.
X
X
-
Originally posted by DuRWooD View PostI didn't do any measurements on the pads, but I'd say they have about 20% more surface area. The EGT piston, being 31mm is 6.8% larger than the mx3/gtx's 30mm piston.-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE! pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606
Comment
-
we should throw that info in a thread to have it stickied, I wouldn't have thought the GTX rear calipers would have been the same as MX-3 lol, cool beans. Be sweet if you had a spare FWD BG rear caliper to compare to see if they're actually MX-3 calipers, since I remember the mounting points being different between the two.-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE! pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606
Comment
-
My 4wd calipers are the same as 2wd BG calipers.1990 Protege 4WD
GT-X BP26 swap [AT->MT]|Cup holder cut to fit|Synthetic gear oil|Synthetic brake fluid|Corksport SS brake/clutch lines|Mazdaspeed HV oil pump|GT-X front STB|Corksport type I rear STB|Matching full-size spare wheel|Homebrew Brass shifter bushing|Speed Source brass shifter cable bushings|EDM headlights/corners|FMIC|EDM cabin vents
1 3 5
├┼┤
2 4 R
Seeking: Canadian 4WD seatbelts.
Comment
-
Originally posted by Mazda_Powered View Postwe should throw that info in a thread to have it stickied, I wouldn't have thought the GTX rear calipers would have been the same as MX-3 lol, cool beans. Be sweet if you had a spare FWD BG rear caliper to compare to see if they're actually MX-3 calipers, since I remember the mounting points being different between the two.
The EGT and MX3 rear calipers have the same mounting points. The rear disc spindles that will be going in my car are from an MX3 and EGT calipers fit on there fine. The mounting points are the same.
I will also add that the calipers I will be using for my rear disc conversion are 3rd gen escort ones, again the caliper is slightly different on these as well, but it shares the same pads as the Miata and the same mounting points as the EGT/MX3 ones.92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
-
any comparison pictures/info between miata/EGT pads?---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Last edited by DuRWooD; 06-15-2012, 03:37 PM.sigpic
1992 Familia GT-X
1988 323 GTX
2011 F150 Lariat Ecoboost
2014 Civic Touring
Comment
-
How did that happen?1990 Protege 4WD
GT-X BP26 swap [AT->MT]|Cup holder cut to fit|Synthetic gear oil|Synthetic brake fluid|Corksport SS brake/clutch lines|Mazdaspeed HV oil pump|GT-X front STB|Corksport type I rear STB|Matching full-size spare wheel|Homebrew Brass shifter bushing|Speed Source brass shifter cable bushings|EDM headlights/corners|FMIC|EDM cabin vents
1 3 5
├┼┤
2 4 R
Seeking: Canadian 4WD seatbelts.
Comment
-
Originally posted by FE3-323 View Postany comparison pictures/info between miata/EGT pads?
I was honestly very surprised to find rear disc on a 3rd gen escort let alone one of the sedans, so after making sure they bolted up and the parking brake cables would work on them on an EGT in the same yard, I grabbed them because they were very clean, almost brand new.
Funny i was just checking the pics as I was posting this and it says the EGT pads also fit 90-93 Miatas.
Anyway here are some comparison pictures I stole from Rockauto:
EGT pad left--------------------------3rd gen Escort/Miata pad right
92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
Comment