Fuel warning light

[bcowie]

i changed the cluster in my car and I now have a fuel warning light I see the pump has a 4 wire conenctor and 1 is empty where does the fuel warning light connect to? Pics would go good

[Semtex]

if the lights on put gas in the tank

[bcowie]

Thank you obvious man
I want to know how to connect it in the tank I know what it means

[Protoss]

if the lights on put gas in the tank

Thanks REGIS, now i dont need to phone a friend.

[charles]

I don't know how helpful this is, but the light itself is supposed to be connected to a white / red stripe wire. Good luck

[1990DX]

yeah mine doesnt do ****, i can tell when the gas is low if i floor it in 1st on a tight corner and it almost stalls though.

[itzkcatz]

Damn the dx didnt even get a fuel warning light?

[charles]

So did mine! Along with a washer warning light... but no door open light.

[bcowie]

the fuel pump has a "fumes sniffer" to help with the low fuel light indicator. if your car did not come with the low fuel light, you will need to remove the fuel pump and replace it with one from an LX (easy way), or get the little wire wrapped arm assembly off an LX and replace that part with the float arm onto your existing pump lid, and plug it in.

the DX has all the wiring necessary to accomplish this task, short of the cluster (for non convienience package equipped DX's) and the sender unit inside the tank. i will look for pictures of the protege fuel pump to facilitate description of what i mean, but i think the description should be adequate.

Ok
so i just need a fumes sniffer then which somehow works using ground

[charles]

I think instead of "sniffing," it uses a current or something to check the conductivity of the fluid.