Struts/Springs for Rally-x

[Shaawww]

Ok guys,

so I was peeking around the web, and all I could find was KYB Excel-Gs that seemed decent. Everything else was street stuff only. Any thoughts on a good rally-x strut/spring setup? DIY Coilover will probably be done with a nice sized lift and if I can find any good struts, Ill throw them on too...

I guess I'm just used to the Impreza where there is like a billion different options for struts/springs (aka, why im running 04STi struts and springs on there, lift and stiffer than a dead guy!)

Thanks for the guidance!

[Mazda_Powered]

Are you wanting more suspension travel as well? There's a few Mazda chassis' out there that are CLOSE to being interchangeable, and have a variety of extended/compressed lengths.

[Shaawww]

Are you wanting more suspension travel as well? There's a few Mazda chassis' out there that are CLOSE to being interchangeable, and have a variety of extended/compressed lengths.

If I could then I would, but for running SCCA stock, you are only allowed to change struts themselves. the next step allows for changing of springs and spring rates (as long as they keep the same geometry as stock setup, so no changing mountings)

So if I could still keep same mounting points, then I am down to try it.. Hell, I butchered a STi suspension to get it to work in my car, Welded a bolt in trunk cage to reduce rear lift and stiffen the back... I am down for almost anything...