*Only fits on Protege 95-98 1.5L DOHC engine models. 2.75" openning AEM bypass valve can be fitted on it
HOW IS IT DIFFERENT?
from our Short Ram Intake System? The Cold Air Intake extends all the way down to the fender well and behind the bumper to replace hot air from the engine with cold air entering through the stock manifold system. Power normally restricted by the stock molded rubber intake system is released by allowing maximum airflow through the throttle body to increase power and throttle response.
from our competitors? Our mandrel bent intake pipes are especially designed for aerodynamics and constant radius to provide maximum and consistent airflow. Our air filters are made of cloth/aluminum, making it much less restrictive than the cotton, or compressed paper used by other brands. Direct bolt on for easy installation ?you will be supplied with all necessary hardware, step-by-step installation instruction sheet*, and personal assistance from our tech support to guide you through any problems!
Note: Installation for the Cold Air Intake System is slightly more difficult than the Short Ram Intake System ?professional installation is recommended for those with no mechanical knowledge. *Instruction sheet might not be available for some models, please check the instruction availability on each product info.
COSMO Cold air Intake System = 7 HP + (Stock) COSMO Racing Cold Air Intake System stops sucking hot air from high heat engine compartment and allowing cold air enter through the stock manifold system. By removing the stock molded rubber intake system and adding the quality mandrel bent intake piping with a constant radius, maximum airflow through the throttle body is reached. The extreme cold air and maximum airflow result in better throttle response and more horsepower. Direct bolts on with out any modification!! Professional installation highly recommended for this intake system, instruction sheet included.
b
Sub Total: $104.50
Products
Accesories
Air Intake Filter Adapter Kit
Air Intake System
Cold Air System CAI
MAZDA
Short Ram System SRI
Air Intake System Cold Air System CAI MAZDA PROTEGE 1.5L DOHC 1995-1998 MODELS
Cosmo Racing Air Intake System increase your car's performance by providing cooler, denser air to the engine. Give your car a boost!
TECHNOLOGY
Designed for street and track use, the aerodynamic piping and non-restrictive air filter allow maximum air flow into the engine without compromising air filtering.
INSTALLATION DIFFICULTY: EASY-MEDIUM
Our air intake systems are designed as direct replacement for the stock system for easy DIY installation and comes complete with all necessary hardware. Step-by-step instructions are available for selected car models.
Category Air Intake System Cold Air System CAI MAZDA
Item Number MZPROTE959815-CAI
Make MAZDA
Name PROTEGE 1.5L DOHC 1995-1998 MODELS
Price $104.50 US
Instruction Sheet Not Available
Available Colors
*Only fits on Protege 95-98 1.5L DOHC engine models. 2.75" openning AEM bypass valve can be fitted on it
HOW IS IT DIFFERENT?
from our Short Ram Intake System?The Cold Air Intake extends all the way down to the fender well and behind the bumper to replace hot air from the engine with cold air entering through the stock manifold system. Power normally restricted by the stock molded rubber intake system is released by allowing maximum airflow through the throttle body to increase power and throttle response.
from our competitors? Our mandrel bent intake pipes are especially designed for aerodynamics and constant radius to provide maximum and consistent airflow. Our air filters are made of cloth/aluminum, making it much less restrictive than the cotton, or compressed paper used by other brands. Direct bolt on for easy installation ?you will be supplied with all necessary hardware, step-by-step installation instruction sheet*, and personal assistance from our tech support to guide you through any problems!
Note: Installation for the Cold Air Intake System is slightly more difficult than the Short Ram Intake System ?professional installation is recommended for those with no mechanical knowledge. *Instruction sheet might not be available for some models, please check the instruction availability on each product info.
COSMO Cold air Intake System = 7 HP + (Stock) COSMO Racing Cold Air Intake System stops sucking hot air from high heat engine compartment and allowing cold air enter through the stock manifold system. By removing the stock molded rubber intake system and adding the quality mandrel bent intake piping with a constant radius, maximum airflow through the throttle body is reached. The extreme cold air and maximum airflow result in better throttle response and more horsepower. Direct bolts on with out any modification!! Professional installation highly recommended for this intake system, instruction sheet included.
http://cosmoracing.com/productinfo.asp?cid=193&pid=1335&added=1
Copyright © 2001 COSMO Racing All rights reserved | Link Exchange |
HOW IS IT DIFFERENT?
from our Short Ram Intake System? The Cold Air Intake extends all the way down to the fender well and behind the bumper to replace hot air from the engine with cold air entering through the stock manifold system. Power normally restricted by the stock molded rubber intake system is released by allowing maximum airflow through the throttle body to increase power and throttle response.
from our competitors? Our mandrel bent intake pipes are especially designed for aerodynamics and constant radius to provide maximum and consistent airflow. Our air filters are made of cloth/aluminum, making it much less restrictive than the cotton, or compressed paper used by other brands. Direct bolt on for easy installation ?you will be supplied with all necessary hardware, step-by-step installation instruction sheet*, and personal assistance from our tech support to guide you through any problems!
Note: Installation for the Cold Air Intake System is slightly more difficult than the Short Ram Intake System ?professional installation is recommended for those with no mechanical knowledge. *Instruction sheet might not be available for some models, please check the instruction availability on each product info.
COSMO Cold air Intake System = 7 HP + (Stock) COSMO Racing Cold Air Intake System stops sucking hot air from high heat engine compartment and allowing cold air enter through the stock manifold system. By removing the stock molded rubber intake system and adding the quality mandrel bent intake piping with a constant radius, maximum airflow through the throttle body is reached. The extreme cold air and maximum airflow result in better throttle response and more horsepower. Direct bolts on with out any modification!! Professional installation highly recommended for this intake system, instruction sheet included.
b
Sub Total: $104.50
Products
Accesories
Air Intake Filter Adapter Kit
Air Intake System
Cold Air System CAI
MAZDA
Short Ram System SRI
Air Intake System Cold Air System CAI MAZDA PROTEGE 1.5L DOHC 1995-1998 MODELS
Cosmo Racing Air Intake System increase your car's performance by providing cooler, denser air to the engine. Give your car a boost!
TECHNOLOGY
Designed for street and track use, the aerodynamic piping and non-restrictive air filter allow maximum air flow into the engine without compromising air filtering.
INSTALLATION DIFFICULTY: EASY-MEDIUM
Our air intake systems are designed as direct replacement for the stock system for easy DIY installation and comes complete with all necessary hardware. Step-by-step instructions are available for selected car models.
Category Air Intake System Cold Air System CAI MAZDA
Item Number MZPROTE959815-CAI
Make MAZDA
Name PROTEGE 1.5L DOHC 1995-1998 MODELS
Price $104.50 US
Instruction Sheet Not Available
Available Colors
*Only fits on Protege 95-98 1.5L DOHC engine models. 2.75" openning AEM bypass valve can be fitted on it
HOW IS IT DIFFERENT?
from our Short Ram Intake System?The Cold Air Intake extends all the way down to the fender well and behind the bumper to replace hot air from the engine with cold air entering through the stock manifold system. Power normally restricted by the stock molded rubber intake system is released by allowing maximum airflow through the throttle body to increase power and throttle response.
from our competitors? Our mandrel bent intake pipes are especially designed for aerodynamics and constant radius to provide maximum and consistent airflow. Our air filters are made of cloth/aluminum, making it much less restrictive than the cotton, or compressed paper used by other brands. Direct bolt on for easy installation ?you will be supplied with all necessary hardware, step-by-step installation instruction sheet*, and personal assistance from our tech support to guide you through any problems!
Note: Installation for the Cold Air Intake System is slightly more difficult than the Short Ram Intake System ?professional installation is recommended for those with no mechanical knowledge. *Instruction sheet might not be available for some models, please check the instruction availability on each product info.
COSMO Cold air Intake System = 7 HP + (Stock) COSMO Racing Cold Air Intake System stops sucking hot air from high heat engine compartment and allowing cold air enter through the stock manifold system. By removing the stock molded rubber intake system and adding the quality mandrel bent intake piping with a constant radius, maximum airflow through the throttle body is reached. The extreme cold air and maximum airflow result in better throttle response and more horsepower. Direct bolts on with out any modification!! Professional installation highly recommended for this intake system, instruction sheet included.
http://cosmoracing.com/productinfo.asp?cid=193&pid=1335&added=1
Copyright © 2001 COSMO Racing All rights reserved | Link Exchange |
Comment