Well tired of the MX-3 now. Too long too much time and too much money.
Basically I never get anytime to work on it, nor do I have that desire to finish it anymore. Once it becomes a burden its time to sell it and start anew.
Below is a list of parts with prices, attached are pics with signs. There are a few things that aren't pictured. Will get them ASAP if needed... really only the flywheel and clutch. I have cleared this with Ryan, so no wories![Smilie](https://www.clubprotege.com/forum/core/images/smilies/smile.gif)
Here goes.
EDM 323 Garnish - 120 + S&H - For a 323, needs bulbs if you want the fogs to work. Clubpro vinyl can be removed easily for those that want me to
LCA bushings - 50 shipped - For a Escort, but same suspension, so make a great upgrade
Axle seals - 20 shipped - Reason I lost a quart of expensive synthetic 75w 90
JDM pipe with JDM HKS from an R33 or something
charge pipe sold. HKS BOV STILL AVAILABLE. 75 + S&H and its yours.
wastegate - 75 + S&H - no fittings... they run 20 bux on RRE's website. Tial Flange
misc piping - 50 shipped - Good for exhaust or FMIC pipes
XS-Power T3 (eBay special) - 250 + S&H - NEVER run, always stored away from elements
FC FMIC - 200 shipped - Never used, good for 30 psi or something crazy. 3.5in thick
Magnaflow Cat - 50 shipped - never used or installed
Magnaflow muffler - 100 + S&H - never used or installed
flexpipes - 25 shipped each - never used or installed
2.5 SS J bend - 40 shipped - good for FMIC pipe making
trubendz ZX2 SS exhaust system - 200 shipped - meant for ZX2, others have made it work. SS
XS power MBC - 60 shipped - MBC.
MX3 rear tie bar - 25 shipped - came with my MX-3
SS manifold - 50 + S&H - eBay special that local shop had trouble welding, needs weld work to be used properly...pending
oil feed/drain lines - 100 + S&H - braided SS lines. Comes with fittings shown. OEM GTX fitting seperate
MX3 Strut tower bars - 250 + S&H - AWESOME deal.. these are the same ones edwin has been bragging about. Edwin molested these with his bare hands...pending
EDM GTX harness - 300 shipped - from dave, left hand drive EDM harness. Dirt cheap. All plugs there
RX-7 injectors 460cc - 50 + S&H - new pintle caps, o-rings, filter screen, etc replaced.
Filled Motor Mounts - 100 + S&H - 94a dur epoxy. 6% flex
Monster power block - 20 + S&H - good for battery relocate
RS cluster - 25 + S&H - needed in GS to BP conversion
Stewart Warner gauges - 125 + S&H - EGT and boost. Got these from Pigeon long ass time ago.
15in Miata Rims, crappy Hancook tires - 250 - prefer local sale...
ZX2 struts + Sprint springs - 150 + S&H - used, but still good
G series axles (1/2 shaft included) - 100 + S&H - one remanned, other came with tranny
Remaned Alt. - 50 + S&H - O'Rilley's remanned alt. One for the protege LX
G series tranny (60k) - 200 + S&H - found in j/y in protege that had been hit in rear. Had ~60k.
G series speedo cable - 25 shipped - needed for the G series tranny
GTR belt conversion - 100 + S&H - no one seems to want this, but I'll put it up again. Needs A pillars for full conversion unless you mind staring at the small gap with the OEM A pillars.
Fidanza Flywheel - 350 shipped - Bought from Jon, installed into the car and Never used. Needs good home. Weighs less than 10 lbs.
Spec Stage 2 clutch - 300 shipped - Installed, and never used. Needs good home, still organic disc for driving comfort.
All prices are USD and subject to being sold locally.
All items are sold on a first come first serve basis.
Paypal preferred. M/O or cash at buyers own risk.
UPS/FedEx (cheapest one) will be used for tracking number.
All items will be insured over their sold value or 100 dollars, which ever is greater.
Basically I never get anytime to work on it, nor do I have that desire to finish it anymore. Once it becomes a burden its time to sell it and start anew.
Below is a list of parts with prices, attached are pics with signs. There are a few things that aren't pictured. Will get them ASAP if needed... really only the flywheel and clutch. I have cleared this with Ryan, so no wories
![Smilie](https://www.clubprotege.com/forum/core/images/smilies/smile.gif)
Here goes.
EDM 323 Garnish - 120 + S&H - For a 323, needs bulbs if you want the fogs to work. Clubpro vinyl can be removed easily for those that want me to
LCA bushings - 50 shipped - For a Escort, but same suspension, so make a great upgrade
Axle seals - 20 shipped - Reason I lost a quart of expensive synthetic 75w 90
JDM pipe with JDM HKS from an R33 or something
charge pipe sold. HKS BOV STILL AVAILABLE. 75 + S&H and its yours.
wastegate - 75 + S&H - no fittings... they run 20 bux on RRE's website. Tial Flange
misc piping - 50 shipped - Good for exhaust or FMIC pipes
XS-Power T3 (eBay special) - 250 + S&H - NEVER run, always stored away from elements
FC FMIC - 200 shipped - Never used, good for 30 psi or something crazy. 3.5in thick
Magnaflow Cat - 50 shipped - never used or installed
Magnaflow muffler - 100 + S&H - never used or installed
flexpipes - 25 shipped each - never used or installed
2.5 SS J bend - 40 shipped - good for FMIC pipe making
trubendz ZX2 SS exhaust system - 200 shipped - meant for ZX2, others have made it work. SS
XS power MBC - 60 shipped - MBC.
MX3 rear tie bar - 25 shipped - came with my MX-3
SS manifold - 50 + S&H - eBay special that local shop had trouble welding, needs weld work to be used properly...pending
oil feed/drain lines - 100 + S&H - braided SS lines. Comes with fittings shown. OEM GTX fitting seperate
MX3 Strut tower bars - 250 + S&H - AWESOME deal.. these are the same ones edwin has been bragging about. Edwin molested these with his bare hands...pending
EDM GTX harness - 300 shipped - from dave, left hand drive EDM harness. Dirt cheap. All plugs there
RX-7 injectors 460cc - 50 + S&H - new pintle caps, o-rings, filter screen, etc replaced.
Filled Motor Mounts - 100 + S&H - 94a dur epoxy. 6% flex
Monster power block - 20 + S&H - good for battery relocate
RS cluster - 25 + S&H - needed in GS to BP conversion
Stewart Warner gauges - 125 + S&H - EGT and boost. Got these from Pigeon long ass time ago.
15in Miata Rims, crappy Hancook tires - 250 - prefer local sale...
ZX2 struts + Sprint springs - 150 + S&H - used, but still good
G series axles (1/2 shaft included) - 100 + S&H - one remanned, other came with tranny
Remaned Alt. - 50 + S&H - O'Rilley's remanned alt. One for the protege LX
G series tranny (60k) - 200 + S&H - found in j/y in protege that had been hit in rear. Had ~60k.
G series speedo cable - 25 shipped - needed for the G series tranny
GTR belt conversion - 100 + S&H - no one seems to want this, but I'll put it up again. Needs A pillars for full conversion unless you mind staring at the small gap with the OEM A pillars.
Fidanza Flywheel - 350 shipped - Bought from Jon, installed into the car and Never used. Needs good home. Weighs less than 10 lbs.
Spec Stage 2 clutch - 300 shipped - Installed, and never used. Needs good home, still organic disc for driving comfort.
All prices are USD and subject to being sold locally.
All items are sold on a first come first serve basis.
Paypal preferred. M/O or cash at buyers own risk.
UPS/FedEx (cheapest one) will be used for tracking number.
All items will be insured over their sold value or 100 dollars, which ever is greater.
Comment