GI: stainless steel GTR downpipe flanges

[therieldeal]

Would anyone be interested in these? they would be identical to the one on my car, i attached a picture below...

It'd be roughly $50 for a flange and two (re-useable) copper gaskets. with this you could build a divided wastegate downpipe like the corksport GTX pipe, or you could completely eliminate the stock gate and run an external like i decided to do.

in case anyone is wondering, there is BARELY enough room to put a 3" pipe on this flange, thats what mine has. i couldn't even use the stock studs and nuts, i had to use allen head cap screws and they barely fit. i believe the turbine port is 2.5" but i'm waiting for a confirmation on the dimensions of the ports.

[atomicEGT]

I have want.

[StealthStyle]

yes, i will take one off your hands.

you wouldn't happen to have vj-23 compressor outlet flanges as well?

[therieldeal]

i dont, but the aluminum flange that corksport sells for the GTX will work. the vj20 and vj23 use identical compressor outlet flanges... same hole diameter and everything.

[18sOnAiR]

I would be interested in two.

[atomicEGT]

i dont, but the aluminum flange that corksport sells for the GTX will work. the vj20 and vj23 use identical compressor outlet flanges... same hole diameter and everything.

No ****? So I won't have to make new intercooler piping after all...

[therieldeal]

cool, i'm glad theres a fair bit of interest here

yeah, you may need to adjust the hotside pipe anyway matt because the vj23 hangs down lower... minor tho

[atomicEGT]

Nothing a little cutting and re-welding can't fix.

[frozatch]

i would be interested

[therieldeal]

bear with me guys, the guy making these seems to have temporarily disappeared.

the interest seems to be there, now we just have to get them made