If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Looking to build up a hybrid, but I need the hot-side of a VJ-14 to bolt up with the cold-side of a VJ-11 (which I have). Let me know if you might have a spare laying around. Thanks.
just run the whole vj-11. you wont be disappointed.
festiva #1 stock daily 63 whp FTW
festiva #2 bp+t, sink trap style turbo setup, g series trans, thunderturd 60 trim, 550cc's, s-afc, rx7 vaf, 38mm external wastegate, fmic, etc.... let me know how the taillights look
Sorry on the hot side...I just brought home another GTX on Sunday and have the job of parting it out ahead of me. The tubine housing is shot...too many cracks. I cruise the bone yards and have taken apart MANY turbos but this one beat them all on cracks....but let me know if you need anything else.
Clay
Sorry on the hot side...I just brought home another GTX on Sunday and have the job of parting it out ahead of me. The tubine housing is shot...too many cracks. I cruise the bone yards and have taken apart MANY turbos but this one beat them all on cracks....but let me know if you need anything else.
Clay
Thanks for looking. Thanks for trying. I'm still thinking about swapping in ta JV-11, but in order to do so, I need the exhaust elbow off of an MX-6 turbo or 626GT (turbo) from the 80's. It's the first exhaust piece that bolts to the hot-side of the VJ-11 (five bolt holes) and has the spot for the oxygen sensor (at least that's what I've been told). This will hopefully allow me to have a spot for the sensor for an air/fuel meter (gauge).
So, when you go to the junkyard (any and all of you) I'd really appreciate someone checking for this part! Please........
Comment