Does anyone know how to take off the original head unit from a 98 protege...I've been looking at these forums for hours and couldnt find out how to remove it. Is there some kind of clip that is secretly hidden? I didnt see any screws nor clips that will allow me to get to the stock HU....Can someone please help me out???
Announcement
Collapse
No announcement yet.
98 Protege H.u Install Help!!!
Collapse
X
-
there is a trim panel that needs to be removed
then i believe there might be 2 covers on the sides of the deck... snap those off and you will have 4 holes
you need a special tool that goes in these four holes, and then pulls the deck out... you're gonna need to go to an audio shop with it all prepared, and hopefully they spend 10 seconds and snap it out for you
i did this 3 years ago, so hopefully im right... cause i barely remember
Comment
-
where the circles are, thats where you'd find clips
theres more along the edges, as well as more down by the cigarette lighter
in the OEM deck, there will be two little covers where the arrows are pointing
those need to be removed
once you remove it each corner will have a hole
the special tool inserts a prong in each hole, and then unlocks it... and then the deck can slide out
be nice to that trim panel tho, you dont want to break it...
Comment
-
Okay, I see. Well, I've removed that trim panel before. You have to pull it hard because the clips are very stiff. Like Chris said there are plastic clips holding it, so you have to be careful not to break them. Make sure you unplug the cigarette lighter if you want to put that trim piece away.
Comment
Comment