Originally posted by JPmotorsports
View Post
Announcement
Collapse
No announcement yet.
JP Motorsports BG/BF/GT4 Rear subframe production and discussion.
Collapse
X
-
w0000000t!!!
So, I just changed jobs, and now have two hours a day free that used to be commuting. Which means I can get my butt out in the garage and get crackin' on my stack of projects!!
(I still have the car on jackstands from before, after putting the Mazdaspeed clutch-type LSD in the stock housing, and still have the engine on the hoist...
On the top of the list, is to get Jim some Paypal doolers, and get ready for the GT-4 rear diff!
--sarge
Comment
-
Hey guys-we've been cranking out racecars---lot's of BMW's as of late-just finished a Subaru Time Attack car this morning and delivered it. We're off to NASA Nationals today and back in next week---we're finishing up a VOLVO project PDQ and then I should be back on these-there's not much left at all---the legs and then swaybar mounts...here's that sube---600HP Street class car-people are starting to step up again in that series!
sigpicwww.piercemotorsports.com www.piercemotorsport.com Like us on facebook http://www.facebook.com/home.php#!/p...91292610897146
Comment
-
Next project is a front subframe........92 Mazda MX3 GS> For sale, $1750 OBO
94 Escort wagon--BP swap coming, VF10 Turbo, COP, EVO ECU, 03 ZX2 front end conversion
"Hold yourself accountable before you are held accountable"
EV14 330cc@3Bar injector kits available.
EV14 GT500 injector kits available for the BP. 610cc@3Bar.
EV14 925cc@3Bar injector kits available
BP Forged H beam rods available now
KL Forged H beam rods available now
K8/KF Forged H beam rods awaiting test fit
FS Forged H beam rods awaiting test fit
F2 Forged H beam rods awaiting test fit
FE3 Forged H beam rods coming soon
Mitsubishi 3.8 MIVEC rods coming soon
Aluminum CAS/Distributor caps
BP oil jet eliminators
EV14 fuel rail spacers
More stuff coming soon.......
Comment
-
Ok-we're finally finishing up all the cars/projects and have some free time coming up to knock these out. At your earliest convenience give me a PM and let me know what type of swaybar mount you'd like on the crossmember. I have a progress bar here---it has the standard 2 bolt mount---I can do something similar to stock although the slot would have to be a hole/the oem bracket would need to be modified with a washer or just a replacement bracket. We can also do mounts for a speedway engineering torsion bar if someone wanted to go that route---either option is fine with me and we don't need to do them all the same-let me know guys-thanks!!!sigpicwww.piercemotorsports.com www.piercemotorsport.com Like us on facebook http://www.facebook.com/home.php#!/p...91292610897146
Comment
-
Im running a progress bar- so put me under that bucket---Has ClubProtege helped you in someway? show your support by Contributing--- Click Here---
1992- project FE3..... 313 WHP @ 9.3psi
I pet my dash when I get into the car..."good car"he actually has a mazda tree, parts grow on it
Comment
-
Awesome-will do!sigpicwww.piercemotorsports.com www.piercemotorsport.com Like us on facebook http://www.facebook.com/home.php#!/p...91292610897146
Comment
-
Just checking in---got all the legs welded onto the units although I may have some clearance issues to address for those using stock arms---that's this weeks project...We're having the lower plates sheared to dimple die and then weld on---and then I've got 2 progress bars and a stock bar for the swaybars---everyone else check in when you've got time and let me know what you'd like. When finished I'm sending them all out to get sand blasted/cleaned up---we may have an opportunity for powdercoating---the guy that I've been using for the chassis brace stuff will let me slip ones/two's in to the white/black/red type of batch's---then if someone wanted anthracite we could just wait for my next batch...sigpicwww.piercemotorsports.com www.piercemotorsport.com Like us on facebook http://www.facebook.com/home.php#!/p...91292610897146
Comment
-
Do you know anything about the BF Wagon rear subframes? I just purchased a parts GTX to swap the AWD into the wagon, and I'd rather purchase a bolt in subframe using the OE Mazda rear diff (all BF GTX factory parts). I can send the wagon subframe itself if its different, but I assume its the same as the other FWD cars.
Comment
-
Originally posted by JPmotorsports View PostJust checking in---got all the legs welded onto the units although I may have some clearance issues to address for those using stock arms---that's this weeks project...We're having the lower plates sheared to dimple die and then weld on---and then I've got 2 progress bars and a stock bar for the swaybars---everyone else check in when you've got time and let me know what you'd like. When finished I'm sending them all out to get sand blasted/cleaned up---we may have an opportunity for powdercoating---the guy that I've been using for the chassis brace stuff will let me slip ones/two's in to the white/black/red type of batch's---then if someone wanted anthracite we could just wait for my next batch...
I am still alive. Unfortunately just been really busy. And my notifications for the forum are not working. Let me know whats needed on my end.Ian Boyd- Bellingham, WA (click vehicle to view)
1988 BF GTX
1990 x2 BG AWD Protege
1991 Escort GT- SOLD
1975 911 S Widebody 3.6 conversion
2005 Corolla
Comment
-
Originally posted by djcommie View PostDo you know anything about the BF Wagon rear subframes? I just purchased a parts GTX to swap the AWD into the wagon, and I'd rather purchase a bolt in subframe using the OE Mazda rear diff (all BF GTX factory parts). I can send the wagon subframe itself if its different, but I assume its the same as the other FWD cars.
So guys we're still sorting out the uptravel issues---not a big change, just one leg needs to be moved on the 4WD units---the 2WD units have good clearance. It'll take a week to get back up to speed from SEMA/being gone and then we'll try an finish these up by the end of the year.
Glad to hear from you Ian---yeah the forum software is a bit glichy, but seems better as of late.
The units are stacked nicely and in front of me/the guys everyday so we have to look at them---I'll post some more pics when I have something to look at-talk soonsigpicwww.piercemotorsports.com www.piercemotorsport.com Like us on facebook http://www.facebook.com/home.php#!/p...91292610897146
Comment
-
What's the price on these things again?Escort GTR -- 11.87 @ 117.6 mph -- 320 HP / 325 Ft. Lbs. @ 23 PSI
... The first FWD BG with a Toyota E153 transmission conversion in the USA!
Looking for BP x Toyota E153 adapter plates? PM me or contact me on Facebook: Riel Performance Parts
Comment
Comment