VJ 20 turbo outlet

[Lex]

Hi guys,

I was wondering if I could use the turbo outlet of another turbo for the VJ 20. How does the flange size on the outlet compare to that of a DSM Tdo5H compressor housing (14b 16g 18g and 20g) or the Merkur 2.3l compressors?

Thanks for the info in advance

[redfox]

i dont know what fits but i bought a gasket from CS and then made my own flange with 1/16 steel....

[Lex]

I would too, but I dont have a welder

[redfox]

dont need a welder to make the flange...

[Lex]

well, I would like to weld it to an outlet pipe, like the one on e-bay here

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33742&item=7959673497&rd=1#ebayphotohosting

Are you going to weld your own pipe on there?

[popsicle]

i have a 14b and the outlet is smaller than the vj20 outlet. CS sells the flange too by the way but it's aluminum. i just made mine in the machine shop. and works nicely. it's not too bad until you wanna bore the hole in the middle...

Des.

[Lex]

damn, back to square one on that one - going to have to find a machine shop

[redfox]

i ahve some spair metal that i could try to make another one...i dont have access tot eh tools that i had to make myn so it wont be as nice but will get the job done good

[elscotto80]

I paid a machine shop 20 bucks to make a flange and then weld it to a 90 degree pipe.

[redfox]

I paid a machine shop 20 bucks to make a flange and then weld it to a 90 degree pipe.

sweet...i paid 50 cents for the sheet of metal and made it myself

[elscotto80]

Well screw you and your welding skills