My nickname ..

[B8T']

B8T' .. Stands for a Mazda 1.8L S.O.H.C. Mazda engine with a forced induction device on it .
I want a B8-T ..

My goal is about 160 WHP's on stock internals ..
It's also a ghetto set-up .. Which means , shall not cost more than a KL-ZE swap inside my '93 Mazda 323 DX ..

About 2000$ ..

[B8T']

I'd like to know what parts to use ..?


150 WHP's is a good goal also .. Although I know I'll have more torque .

[LisaT]

well from what ive heard you can use a bp computer on a b8 therefore i would guess you could use a bpt computer.

[Tazman2]

You are aware a F series tranny can barely take a stock BP motor for too long let alone you making even more power?!

[kozzman555]

for $2000 i could be running damn near 12's if not 12's. you need to do some research.

[elscotto80]

2k will just about get you a used bp even with a g-series tranny, vj-20 and most of the parts you will need to turbo your motor. read my how to turbo your bp in the stickey section.

[laruei]

Ill tell you all that as a rough guess ive spent prob a good ammount over 4 grand AT LEAST on my build and im not done yet.

[neuspeedescort]

2k will get you in the 14's and maybe 13's. but you will need more then 4k to see 11's. trust me on that one!

he doesn't want to go the bp way. look at his HMT post.

http://www.homemadeturbo.com/forum/index.php?topic=69601.0

NEUMAN

[laruei]

link no worky...i dont wanna be a memeber...

[neuspeedescort]

become one its a great site and alot of great turbo info!


NEUMAN

[B8T']

Anyone ever did a B8T' ?

[laruei]

Ahh run a Megasquirt..its cheap...but get a friend to tune it for you if you dont wanna spend the time to learn it...or you can pay out the nose like i did.

[B8T']

Could I use ; for the management mods ..

JDM 'BPT ( GTX ) injectors , JDM 'BPT ( GTX ) Mass Air Flow .. Add a manual boost controller then set the boost to 9 PSI's and call it a day ?

Remember : 2000 $ CDN is my budget ..

Help please ..

[B8T']

Ahh run a Megasquirt..its cheap...but get a friend to tune it for you if you dont wanna spend the time to learn it...or you can pay out the nose like i did.

I want to learn .

[neuspeedescort]

the b8 has 8.9:1 compression you say? well the bp is 9:1. they both have the same bottom end. the also both use triple layer stainless steal headgaskets stock! you need to search more man you are a nignog and it shows. don't think because you come over here people are going to be nicer to you. learn to use the search function and life will be easier.


NEUMAN