Originally posted by MD323
View Post
Announcement
Collapse
No announcement yet.
DeeAOne's BF KLDE Swap.
Collapse
X
-
Originally posted by jitb37 View Posti was told that the "goldmember" made 500 also.. and yes florida has alot of power down there. Just have to find them! lol"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
Originally posted by klzemx3 View PostBad thing about making that much power is the transmission aint going to hold up at all.Too much tq!!lol
gearing depends on your setup, if your N/A and you dont have to shift to 5th before the end of the 1/4 than stay with the shorter gears and work on making more powa"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
good points to all, but here's another question.
the trans is a '93. has anyone heard of only the '96+ models having the 4.38 FD? and that the '93-'95 trans had the same 4.10 as all the others?
'88 323 sedan, K-swapped..
'03.5 Mazdaspeed Protege - miss it so much..
'01 Dodge Ram 3500 Cummins - 323 hauler
Comment
-
626 is the only one to get the longer gearing in later years iirc"Discontent is the first necessity of progress."
-Thomas A. Edison
"There is a fine line between ballin' on a budget, and dreamin' on an empty wallet."
*Junked* 92 mx3, BP swap- milage whore, beaten up and down the east coast
*Junked* KLZE powered 323 on Megasquirt 1
172.60HP & 156.93 TQ with only headers and short ram intake. back under the knife for a BPT swap.
New Daily stock 1.6L 1999 Mazda Protege LX
Comment
-
Originally posted by DeeAOne View Postgood points to all, but here's another question.
the trans is a '93. has anyone heard of only the '96+ models having the 4.38 FD? and that the '93-'95 trans had the same 4.10 as all the others?
From all my personal experience all model years have the same gears and the final drives differ as follows.
Probe V6 /MX3 V6 - 4.38
MX6 V6/626 V6 - 4.11
As to the later year V6 626s having different fifth gear ratios I've never confirmed that thru personal experience, but I do everything I can to finish the qtr in 4th so I don't pay much attention to 5th gear any more.
In general, if the vin on the transmission starts with "1Y" you have the 4.11 one. The "JM" is out of MX3s and if I recall the Probes start "1Z"92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video, Dyno Video
As of July 2011 the MX3 has been retired and sold.
Comment
-
alright thanks. im probably not going to put in the PGT trans right now, but when this 626 one bites the dust (which we know it will, lol) ill put it in.
anyway, shes almost ready..
'88 323 sedan, K-swapped..
'03.5 Mazdaspeed Protege - miss it so much..
'01 Dodge Ram 3500 Cummins - 323 hauler
Comment
-
oooooooo she lookin purdy91 protege gt. dropzone mx3 springs, mx3 crossmember, ractive front and rear strut braces, rear lower mx3 brace, 4 wheel disc brakes, corksport ss brake and clutch lines,kvr front pads, ractive cai,ram air hood scoop, modified front bumper, shaved ant and rear trunk lock, fubu ant, short shifter, corksport bronzeoil shifter bushings,92 glass sunroof and tail lights, mx3 center console, autometer gauges (volt and oil pressure) cluster needles painted to match, sound system, 17 inch eagle alloy 193 with 205 40 17 rubber. klze is ALIVE BABY!! . http://www.cardomain.com/ride/2394656http://www.toprotege.com/forums/show...hlight=project[url]
Comment
-
That'd look better in my 626
looking good man! I think I'll be asking you for pointers on KLs now lol-Jack
ONTARIO MAZDA CLUB! Join! https://www.facebook.com/groups/500055016671733/
91 626 LX - basically stock and pretty slow still
http://www.clubprotege.com/forum/sho...my-GD-626-LX-)
01 E53 3.0i - FOR SALE! pm if interested
91 USDM Protege LX - SOLD! turbo/manifold up for sale!
http://www.clubprotege.com/forum/showthread.php?t=46606
Comment
Comment