Announcement
Collapse
No announcement yet.
What did you do to your BF today???
Collapse
X
-
So I challenge you to a duel come May Terry. I should be fully functional and ready to go by then, sweet driver's seat at least.
1988 White GTX - #1 parts
1988 Black GTX - #2 reliably broken touge monstar (294,000 miles no rebuilds) - dead
1988 Blue GTX - #3 in progress (view here)
1988 Blue GTX - #4 BPT swapped weekend warrior.
1988 White GTX - #5 Rally car
Comment
-
Challenge me to what:
1.) Rallycross / muddy coolant puddle challenge?
2.) Autocross / fan belt-flinging time challenge?
3.) Touge / spin-out / Bambi-thumping / squealing brake-off? (You'll stand no chance, my technique cannot be equalled)
4.) Grand, kooky, "I've gotta tell you about my plans / pipedream" storytime, tell-off
5.) Who can drive the dickest with worn pads / tires / blown struts / bad alignment / off-timing / boost leak / 2nd gear synchro / crank wobble / loud bearing and still try to look cool while doing it?
Call me when you get the notion to fill up the tank and head to NorCal.
Comment
-
Its true... a miata can't hang in the straights... but will wreck us in the corners. The rx7 (especially the fd) win on both fronts.
I was thinking bambi squealing, spin out off an embankment challenge. I should be in the area may 21-23.
1988 White GTX - #1 parts
1988 Black GTX - #2 reliably broken touge monstar (294,000 miles no rebuilds) - dead
1988 Blue GTX - #3 in progress (view here)
1988 Blue GTX - #4 BPT swapped weekend warrior.
1988 White GTX - #5 Rally car
Comment
-
There will be the grand story tell off as well.
1988 White GTX - #1 parts
1988 Black GTX - #2 reliably broken touge monstar (294,000 miles no rebuilds) - dead
1988 Blue GTX - #3 in progress (view here)
1988 Blue GTX - #4 BPT swapped weekend warrior.
1988 White GTX - #5 Rally car
Comment
-
drov eto work today and noticed my heater doesn't work again. and the tranny or something is making a kind of vibration or shake or some kind of weird noise when idling down, around 1200 rpms any ideas. going to check the gear oil and crank pulley bolts tonight after the little girl goes to sleep.
Comment
-
Originally posted by bighed323 View Posttook apart the heater blower motor. i think the blower motor is going out, the wires aren't coroded are anything. also loosened the alternator belt after tightening it the other day to see if it stop the weird vibrating issue i was having the other day.
It is pretty easy to do. I've done this a LONG time ago, and haven't had any issues so far. I believe that I put the info on the yahoo forum, so it might be in the archives.
Good luck.
Comment
Comment